Small Battery Resistance Tester With Touch Screen For Data Processing Centers

 

Small Battery Resistance Tester With Touch Screen For Data Processing Centers

 

ZX-NZY01 is a new generation of battery tester with touch-screen. It is strictly designed to evaluate and maintain all stationary power systems including Uninterruptible Power System.

Via accurate testing of resistance (or conductance) and voltage, it gives an indication of battery capacity and technical status. The measurement data can be read on the instrument display directly. And it can also be uploaded to PC simply by using the USB drive. With the analyzing software, you could not only keep a record of the testing result but also have detailed analyzing for the status of batteries in different testing conditions.

 

1 Accessories

After receiving the instrument, make sure you have all the following parts.

Name	Number	Name	Number
Carrying case	1	Testing clamp (pair)*	1
Main unit	1	Pin type probe(pair)*	1
USB converter	1	USB drive	1
User manual	1	Power adaptor	1

Note: Testing clamp and pin probe are optional to users. You could select either of them or both.

 

2 Application

ZX-NZY01Battery Condition Analyzer is widely used in the following areas:

¨Telecom: Central Office, data processing centers and Remote Sites

¨Power Utility: Switchgear, Power Station and Power Plant

¨Financial Institutions: Corporate Data Centers

¨Petrochemical: Process Control systems

¨Offshore platforms

¨Government: Local and regional

¨Tax and Revenue Processing Centers

¨Homeland Security, Schools, Army and Navy

¨Air force Facilities, Fire and Police Agencies

¨Hospital UPS system

¨Electrical vehicle suppliers

¨SLA battery manufactures

 

3 Features

sOne unit in two, smart switch to measure both internal resistance and conductance of batteries.

sWide test range up to 6000Ah for Lead-Acid or Nickel-Cadmium single battery which is up to 16V

sField proven accurate and repeatable measurement to identify battery health.

sVery fast and consistent measurement of battery or multiple batteries (with setting once) in seconds

Advanced measurement way of AC signal discharge to test internal resistance or conductance

sUser friendly TFT touch screen and key pad as alternative operation

sBig memory for measurement data storage of more than 100,000 cells

sUniversal micro USB for data exportation and also tester charge

sFunctional PC battery management software for recording of full battery info, easy report print out.

sBattery pack is durable in the field with testing time of 8-12 hours

 

4 Technical Parameters

Applications:

Test single Lead-Acid or Nickel-Cadmium cell or battery string (one by one after setting once).

Cell types supported: 1.2V, 2V, 6V, 12V and other customized types up to 6000Ah.

Voltage: 0.000V—25V DC

Resistance: 0.001 mΩ--100mΩ

Conductance: 100 - 19,990 Siemens

Test Data Storage: 100,000 cells stored internally, unlimited with USB drive exportation

Accuracy:

Resistance/Conductance: 1%

Voltage: 0.15%

Voltmeter Resolution:

1mV

User Programmable Functions:

•Customized battery types

•Low voltage alarm setting

•High resistance alarm setting

•Test mode (push button/touch screen/auto start)

Cable Options:

•Pin probe

•Test Clamp

Custom cables by quotation

Power supply: Li-ion battery (4000mAh), 8~12hours working time after full charge

Display: 272*480 pixel, 4.3”TFT Touch Screen LCD

Data Transfer: USB via micro USB cable

Operation Environment: 0~40℃, 90% relative humidity, non-condensing

 

Main Unit Structure and Operation

Below are the pictures for the main unit: Storage Temperature: -20~50℃

Over Voltage Protection:

•Auto-reset disconnect

•Reverse polarity protected

Housing Material: Acid resistant ABS plastic santoprene overmold

Tester Dimensions: L186*W98*H40 mm

Analyzer Weight: 0.45KG

Shipping Weight: Approximately 2.8Kg