ZX-BCS Multifunctional Electric Transformer Testing Equipment Turns Ratio Vector group test Tester TTR

        Power Transformer Testing Equipment Turns Ratio Meter

Product introduction :

 
ZX-BCS multi-functional ratio tester adopts large screen color LCD as display, full Chinese graphical operation interface and English prompt information, vector diagram display and wiring judgment provide a reliable basis for checking the correctness of the circuit . Full-touch conductive silicone keyboard operation, good operation feel, easy to learn. The on-site verification data can be saved, and a maximum of 1,000 sets of on-site verification results can be stored. Three Phase Power Transformer Turns Ratio Group Tester,a background microcomputer management software can be provided to upload the results to a computer for microcomputerized management.
 
ZX-BCS Multi-functional TTR meter
 
Testing Z connection Scott/inverse Scott connection Transformer
 
 
 
 Function and features :
 
 
1. Input single power, internal digital combination standard sine wave test source output
 
2. Phase angle measurement function: measure the phase angle between high voltage side and low voltage side. Measure the turn ratio and angle of “Non integral point” transformer.
 
3. It can conduct single-phase measurement and three-phase winding automatic test. Three phase turn ratio value, phase angle value, error, tapping position, tapping value can be measured for once.It also can identify connecting group number automatically.
 
4.Testing results can be displayed in the form of digit and hexagon vector diagram, which makes transformer connecting group can be made out obviously.
 
5. With blind test function: There is no need to choose connecting method and group. When measuring Y/△,△/Y transformer, no external short-circuit is needed, connecting method can be shifted automatically according to the chosen testing contents.
 
6. With tapping test function: TTR and TTR error in the position of each tapping switch can be gauged quickly. Just input rated TTR once, instead of inputing over and over again, TTR error in tapping position can be calculated.
 
7. With functions of turns ratio measurement and voltage TTR measurement.
 
8. With 5.6 inch LCD, the effect of data & figure display is visualized and fine.
 
9. With small size and light weight, it is easy to carry.
 
10. With built-in high capacity chargeable lithium battery. Test can be conducted without any power supply on site, and once the battery is charged fully, it can make measurement for more than 500 times continuously.
 
 Product Parameters:
 

 
Attentions:
 

• Before measurement, make sure test sample is in the state of outage and all
• calibrating terminals don’t contact with earth.
• Measuring connection must be operated according to instructions strictly, otherwise any serious consequences should be born by yourself.
• Before measurement, setting parameter must be checked seriously.
• Power socket with earth wire is the best choice for charging.
• Over capacity working is forbidden.
• Converse connection of high voltage and low voltage is forbidden