|
Product Details:
Payment & Shipping Terms:
|
| Product Name: | Wireless High Voltage Phasing Tester | Test Voltage Scope: | 0.4kV-110kV, 220KV(500kV Optional) |
|---|---|---|---|
| Frequency Accuracy: | ±0.1Hz | Power: | Electronic |
| High Light: | high voltage test kit,high potential test equipment |
||
Introduction
TAG-8000 Wireless High Voltage Phase Detector is used for phase identification. The instrument is suitable for transmission line live line operation and secondary side live operation.
The instrument contains receiver, X transmitter (sender) and Y transmitter (sender), telescopic insulation rods. The collectors inspect the line and send relative phase and frequency signal to the receiver. Then the receiver displays the result if it is in-phase. As it is cordless transmission, it is very safe and easy to operate, and applies to various phase test occasions without terrain limitation.
It is portable, live-line tool-supported two-pole phasing testers to be used on AC electrical systems
This wireless Phaser provides a unique method of phasing across a single-phase or three-phase system to make certain that correct polarity has been established prior to "closing-in" a switch. It consists of a transmitter and receiver, which communicate via a radio frequency signal, thus eliminating the need for a connecting cord found on traditional phasing sets. In operation, the transmitter is placed in contact with an energized conductor. The transmitter first acts as a voltage detector by emitting audible and visual indications. After the voltage detection sequence, the transmitter then begins to transmit a signal to the receiver. The receiver is then placed in contact with another energized conductor. The receiver processes the signal and indicates if the conductors are "in" or "out-of-phase" by emitting both audible and visual alarms. The design offers several advantages and increased safety over conventional phasing equipment such an extended range of operation, lightweight design, and higher voltages (up to 220 kV).
Features
1. Conforms to: IEC61010
2. Display: phase difference, frequency, vector diagrams, out of phase or in phase,
3. Power supply: rechargeable Li-battery for main machine and collector, 2500mAH and 350mAH respectively
4. Auto power off, shutdown when no operation after one hour
5. Voice prompts for measurement results and operating procedures
Parameters
| Phase difference accuracy | ≤5° |
| Frequency accuracy | ±0.1Hz |
| Test Voltage scope | 0.4kV-110kV, 220KV(500kV optional) |
| Transmission distance between receiver and transmitter | >130 meters |
| Max distance between X and Y transmitter | 260 meters |
| Leakage current when testing high voltage | <10uA |
| Sender power consumption | <0.1W |
| Receiver power consumption | <0.3W |
| Working environment | -35°~ +50° Humidity: ≤95%RH |
| Storing environment | -40°~ +55° Humidity:≤95%RH |
| Weight | < 10kG |
| Carrying box size |
71×26×11cm |
Contact Person: Nieqi
