Payment & Shipping Terms:
|Product Name:||Battery Inner Impedance Tester||Voltage:||0-25V DC|
|Resistance Range:||0.001mΩ-100mΩ||Conductance:||100 - 19,990 Siemens|
battery internal resistance tester,
battery capacity tester
Small Battery Resistance Tester With Touch Screen For Data Processing Centers
ZX-NZY01 is a new generation of battery tester with touch-screen. It is strictly designed to evaluate and maintain all stationary power systems including Uninterruptible Power System.
Via accurate testing of resistance (or conductance) and voltage, it gives an indication of battery capacity and technical status. The measurement data can be read on the instrument display directly. And it can also be uploaded to PC simply by using the USB drive. With the analyzing software, you could not only keep a record of the testing result but also have detailed analyzing for the status of batteries in different testing conditions.
After receiving the instrument, make sure you have all the following parts.
|Carrying case||1||Testing clamp (pair)*||1|
|Main unit||1||Pin type probe(pair)*||1|
|USB converter||1||USB drive||1|
|User manual||1||Power adaptor||1|
Note: Testing clamp and pin probe are optional to users. You could select either of them or both.
ZX-NZY01Battery Condition Analyzer is widely used in the following areas:
¨Telecom: Central Office, data processing centers and Remote Sites
¨Power Utility: Switchgear, Power Station and Power Plant
¨Financial Institutions: Corporate Data Centers
¨Petrochemical: Process Control systems
¨Government: Local and regional
¨Tax and Revenue Processing Centers
¨Homeland Security, Schools, Army and Navy
¨Air force Facilities, Fire and Police Agencies
¨Hospital UPS system
¨Electrical vehicle suppliers
¨SLA battery manufactures
sOne unit in two, smart switch to measure both internal resistance and conductance of batteries.
sWide test range up to 6000Ah for Lead-Acid or Nickel-Cadmium single battery which is up to 16V
sField proven accurate and repeatable measurement to identify battery health.
sVery fast and consistent measurement of battery or multiple batteries (with setting once) in seconds
Advanced measurement way of AC signal discharge to test internal resistance or conductance
sUser friendly TFT touch screen and key pad as alternative operation
sBig memory for measurement data storage of more than 100,000 cells
sUniversal micro USB for data exportation and also tester charge
sFunctional PC battery management software for recording of full battery info, easy report print out.
sBattery pack is durable in the field with testing time of 8-12 hours
4 Technical Parameters
Test single Lead-Acid or Nickel-Cadmium cell or battery string (one by one after setting once).
Cell types supported: 1.2V, 2V, 6V, 12V and other customized types up to 6000Ah.
Voltage: 0.000V—25V DC
Resistance: 0.001 mΩ--100mΩ
Conductance: 100 - 19,990 Siemens
Test Data Storage: 100,000 cells stored internally, unlimited with USB drive exportation
User Programmable Functions:
•Customized battery types
•Low voltage alarm setting
•High resistance alarm setting
•Test mode (push button/touch screen/auto start)
Custom cables by quotation
Power supply: Li-ion battery (4000mAh), 8~12hours working time after full charge
Display: 272*480 pixel, 4.3”TFT Touch Screen LCD
Data Transfer: USB via micro USB cable
Operation Environment: 0~40℃, 90% relative humidity, non-condensing
Main Unit Structure and Operation
Below are the pictures for the main unit: Storage Temperature: -20~50℃
Over Voltage Protection:
•Reverse polarity protected
Housing Material: Acid resistant ABS plastic santoprene overmold
Tester Dimensions: L186*W98*H40 mm
Analyzer Weight: 0.45KG
Shipping Weight: Approximately 2.8Kg
Contact Person: Nieqi