|
Product Details:
Payment & Shipping Terms:
|
| Product Name: | DC High Voltage Generator Hipot Test Set For Water-cooled | Power: | Electronic |
|---|---|---|---|
| Usage: | High Voltage Tester | Output Current: | 80~200mA |
| Output Voltage: | DC 0~60/80kV | Output Power: | 5-16KW |
| High Light: | high voltage test kit,electronic test equipment |
||
DC High Voltage Generator Hipot Test Equipment Set For Water - Cooled Generator
Introduction
ZGS series is the equipment of testing DC voltage and DC leakage current of water-cooled generator in the situation of water through, which completely overcome the problems of long blow water time, bottom water hard to dry, easy to cause arcing within the coil. The device is light, simple wiring, and easy to read. Polarization compensation voltage is output directly by the case.
Features
1. Electronic control and tune, easy to operate.
2. The date of voltage and current are recorded in the panel, reading without conversion.
3. One minute timing and tip function.
4. Perfect over-voltage and over-current protection function inside, also zinc oxide over-voltage protection outside, which ensure safety of generator.
5. Portable design, suitable for on-site testing.
6. Four parts separated: control unit, Intermediate Frequency Transformer, doubler and accessories, all packed with special shockproof aluminum alloy cabinet, easy to move
Parameter
| Output voltage(kV) | DC 0~60/80kV |
| Output power(W) | 5K-16K |
| Voltage measurement | Digital/Analog double display ±2%(full scale) |
| Stator Winding Leakage Current measuring | Analog Micro-ammeter display ±2% (full scale) |
| Protection Device | Over-voltage and over-current protection circuit inside, over-voltage set by number dial switch. Also zinc oxide over-voltage protection outside |
| Output current(mA) | 80~200 |
| Voltage stability | ≤2.0% when Power supply Voltage vary within 10% |
| catchment tube polarization voltage compensation | ±2.5V |
| Voltage stability | ≤2.0% |
| Control cabinet weight ( 60kV/200mA ) | 35 KG |
| Cylinder weight ( 60kV/200mA ) | 10 KG |
| Intermediate Frequency Transformer ( 60kV/200mA ) | 24 KG |
Contact Person: Emma
Tel: 86-17396104357
Fax: 86-27-65526007
