Payment & Shipping Terms:
|Product Name:||Three Phase Portable Power Quality Analyzer||Measuring Range:||1000V TRMS|
|Input Impedance:||1MΩ, 20pF||Power Consumption:||Less Than 0.5VA / Phase|
|Memory Capacity:||128M Bit FLASH|
3 Phase Power Quality Analyzer,
Yellow Portable Power Quality Analyzer,
3 Phase Energy Meter Calibrator
●It can measure three-phase voltage, zero line voltage, three-phase current, zero line current, frequency, etc.
●Up to 50th harmonic can be measured.
● It can measure three-phase apparent power, active power, reactive power, power factor, three-phase electric energy, etc.
1. Voltage, current, frequency: can measure three-phase voltage, zero-line voltage, three-phase current, zero-line current, frequency, etc.
2. Harmonic measurement: can measure up to the 50th harmonic, and the measurement results include the amplitude of each harmonic voltage, the amplitude of the harmonic current, the total distortion of the voltage harmonics (total distortion rate), and the harmonic / current of each voltage Harmonic content rate; can display harmonic spectrum.
3. Power measurement: It can measure three-phase apparent power, active power, reactive power, power factor, three-phase energy, etc.
4. Three-phase unbalance measurement: can measure three-phase voltage unbalance and positive sequence, negative sequence, zero sequence voltage; three-phase current unbalance and positive sequence, negative sequence, zero sequence current, can display voltage vector, Current vector illustration.
5. Inrush current: At least 40 inrush current events can be recorded.
6. Fluctuation / flicker: Fluctuation, short-term flicker, and long-term flicker measurement.
7. Swell / Swell: Can record voltage swell and sag events, can record up to 40 events.
8. Monitoring record: The basic (steady state) power quality parameters can be recorded for a long time, and the recording time interval can be adjusted from 3 seconds to 30 minutes.
9. Digital oscilloscope: can be used to view the voltage / current signal waveform.
|Voltage / Current / Frequency||It can measure three-phase voltage, zero-line voltage, three-phase current, zero-line current, frequency, and can display effective value, peak value, wave / peak ratio, and waveform graph, trend graph|
|It can measure the fundamental wave of voltage and current and the 2nd to 50th harmonics. The measurement results include harmonic efficiency, harmonic content, harmonic content rate, total harmonic distortion rate (THD); histograms and trend graphs can be displayed.|
|Interharmonic measurement||It can measure 0.1 ~ 19.9 times interharmonics of voltage and current, and the measurement results include the effective value of Interharmonics component and subset, interharmonics content, etc.; it can display histogram, trend chart, etc|
|Power / energy measurement||Can measure three-phase four-wire / three-phase three-wire apparent power (electric energy), active power (electric energy), reactive power (electric energy), power factor, etc.|
|Three-phase unbalance measurement||It can measure the positive sequence component, negative sequence component, zero sequence component, negative sequence unbalance degree and zero sequence unbalance degree of the voltage and current of three-phase four-wire / three-phase three-wire electrical system; it can display the phase angle of three-phase voltage and current , Vector, trend graph|
|Flicker||1 minute flicker, 10 minutes short flicker, 2 hours long flicker measurement|
|Voltage swell / sag / interruption||Detects and records voltage swells, sags, and interruptions|
|Inrush current||Detect and record inrush current events|
|Harmonic power||Can detect 2 ~ 30th harmonic power, can display histogram, trend graph, etc.|
|Power wave||It can measure the rapid change of power (active, reactive, apparent power) according to the set duration (1 ~ 5 minutes)|
|Transient||Can detect voltage transient events of more than 20 microseconds|
|Monitoring records||It can record the steady-state power quality parameters for a long time, including voltage / current / frequency, harmonics, power, three-phase unbalance, fluctuation / flicker, and the recording interval can be adjusted from 3 seconds to 30 minutes.|
|Digital oscilloscope||Can be used to view the voltage / current signal waveform|
1. Voltage signal input circuit:
Input impedance: 1MΩ, 20pF
Measuring range: voltage true effective value 700V (effective value)
Power consumption: less than 0.5VA / phase
2. Current input circuit:
Measuring range: current true effective value 1A, 5A, 10A, 100A, 500A, 1000A, 3000A (select corresponding current sensor)
Power consumption: less than 0.5VA / phase
3. Frequency range of measurement signal: 40Hz ～ 70Hz
4. Display screen: 5.7-inch 640 × 480 color graphic LCD + touch screen
5. Memory capacity: 128M bit FLASH
6. External storage interface: USB (U disk can be plugged in)
7. Working power supply: rechargeable lithium battery, full charge, working for 5 ~ 6 hours
8. External power supply: AC100 ~ 240V / DC16.8V-1A power adapter / charger
Wuhan GDZX Power Equipment Co.,Ltd.is a manufacturer of power test equipment, integrating design, production and sales, providing complete solutions for high-voltage testing and electrical testing services for various power users.The main products include:AC series resonance test device, high voltage test equipment, transformer test equipment, secondary protection / switch test equipment, cable fault tester, arrester test equipment, power metering equipment, standard source series and so on. There are many kinds of products and complete models.
VI.Service and Warranty
* Provide professional consulting service; dedicated salesman and professional technical engineer to answer customer questions.
* Ensure customer get the detailed information about the product in hand.
* Reasonable price, we trust our customers should get the worth what they paid. Quotation stamped and confirmed by Manager.
* Welcome customers visit.
PACKING AND SHIPPING
(1)We will ship products within 10 days after the receipt of confirmation of your payment.
Contact Person: Leny